MIDI

Midi is simple to use in Zen. On page load, all available midi inputs and outputs are printed in your console for reference. The index of the device you wish to use should be assigned to a stream's midi parameter.

MIDI Output

The following parameters control midi routing in Zen:

• midi the midi device to send messages to (passed as an index).
• midichan the midi channel to send messages to. Sends to all channels if not included.
• mididelay delay midi messages by n milliseconds. Useful for synchronising midi and audio.
• cc<number>, as in cc1, cc2 etc. Send control change messages. CC values are normalised (0 - 1).

For example:

// send midi notes to device 1, channel 1
s0.set({ midi: 1, midichan: 1 })
s0.p.n.set('60 62 64 65 67 69 71 72')
s0.e.every(2)
// send cc messages
s0.p.cc1.sine()

MIDI Input

Patterns can also use midi control changes and currently pressed keys as input. The following methods are available:

// use the modulation wheel on device 10 as input, with an initial value of 0.5
s0.p.vol.midicc(1,10,0.5)
// use all pressed keys on device 10 as input
s0.p.n.midinote(10)